The CSOhara front stabiliser performance brackets are engineered to bolster strength and rectify any misalignment in the link angle due to vehicle lowering. By utilising an advanced mounting method for the front stabiliser, this modification is designed to significantly mitigate the tension and thrust exerted during the initial phase of a turn, thereby optimizing the benefits of lowering modifications.

The CSOhara bolt-on camber adapter is designed for effortless installation, eliminating the need for press-fitting ball joints. This innovative adapter allows for an adjustment range of approximately 1 degree in the negative direction, enhancing vehicle handling while also correcting the roll centre. Perfect for enthusiasts looking to optimize their suspension geometry without complicating the installation process.

The CSOhara Negative Camber Adapter (Ball Joint Replacement Type) is designed to enhance your vehicle's handling capabilities by adjusting the camber angle. This adapter is available in two variants: the silver model, which adds +2.0 degrees of negative camber, and the olive brown model, which provides an increase of +3.0 degrees.

The CSOhara Steering Rack Stopper for Preventing Wide Wheel Rims Interferencing with the upper arms. When dealing with rims of 9J width or greater on the front end, along with an inset setting of +60 or more, there is a risk of interference at the limit of the wheel's motion due to specific geometrical constraints.

The CSOhara EPS steering rack rigid collars are engineered with a robust mounting bush design, consisting of upper and lower halves. This innovative construction enhances stability by incorporating a dowel pin that connects the lower half to the subframe. This critical feature minimises the risks of misalignment, ensuring consistent centering of the steering rack.

The CSOhara rigid steering shaft collar is engineered to enhance your vehicle's steering dynamics. By integrating the collar directly onto the steering shaft, this innovative component significantly improves the responsiveness and overall feel of steering actions.

The collar design ensures minimal play between the steering components, resulting in a more direct connection between the steering wheel and the wheels. This leads to enhanced feedback, allowing drivers to sense the road better and respond with precision during both daily driving and spirited manoeuvres.

CSOhara Spherical Bearing Bushes for Lower Damper Arm Joints for Honda S2000 is specifically arranged by CSOhara and manufactured by CARROSSE. The set comes with 4 bushes integrated with rubber boots, offering unparalleled protection without compromising performance. Designed without a specific setting, this product reflects CARROSSE's manufacturer guidelines to ensure optimal compatibility.