Tail End: 89.1φ (Front 38.1φ / Centre 42.7φ/ Rear 50.8φ) with proximity volume value: 92db.

It uses non-woven fabric that speeds up filtration speed without increasing filtration resistance and increases filtration efficiency.

It has a bonnet damper set up on the Al carbon oval type front strut tower bar.

It restricts unnecessary movement of the rear axle, brings out suspension performance, and further improves handling stability.

It improves body rigidity by connecting the left and right sides of the trunk, which has a large opening.

It is a full-fledged roll bar using 6 points (dash relief) / 40φ / wall thickness 2 mm / steel (cold drawn seamless carbon steel).

It effectively reinforces both sides of the lower floor and improves body rigidity.

Increased body rigidity reduces drive loss and provides a sense of unity in driving.

High-performance type that can be used for a wide range of purposes, from general city driving to sports driving.

Sports type that feels similar to stock brakes, but provides a larger safety margin.

It has DuPont Teflon hose on the hose part and stainless steel mesh on the inner part.

Contains a large amount of carbon material, exhibits 30% more braking force, 20% less pad wear (hardness of pad wear), and 30% more crack resistance than normal.

Demonstrates a 20% increase in braking force, 20% decrease in pad wear characteristics (difficulty in pad wear), and 10% increase in crack resistance compared to stock.

6-POT opposing caliper and special big rotor compatible with Copen stock wheels.

Aluminum under panel improves air rectification in the lower part of the engine room.

Made of Steel

This is a special resin molding that is pasted from the A-pillar to the roof where the side window touches.

Uses a bright premium blue mirror surface, which greatly reduces glare from the headlights of following cars when driving at night.

When driving at night, glare from the headlights of following cars is significantly reduced.

17mm hexagon type

Through wheel nut using forged chrome molybdenum steel (SCM435)

Super lightweight and durable